Sale

HSK 63F Tool Gripper Forms BDF, P/N G01-30

HSK 63F Tool Gripper Forms BDF

DIN 69893

Replaces OTT Jakob and REBO grippers.

Call for back order status or multiple order discount.

1-714-307-2332

or send inquiries to sales@hsspindles.com

$999.00 $749.00

SKU: G01-30 Categories: ,
  • Description
  • Additional information

Description

HSK 63F Tool Gripper Forms BDF

Specifications

HSK 63F Tool Gripper Forms BDF PN G01-30

Material: Through hardened alloy steel. Precision ground surfaces. Low friction coating.

Manufacturer: Made in Italy.

Balance Grade: <G2.5 @ 24,000 rpm

Maintenance: Protect from rust with rust preventative spray. Remove spray before placing into service. Use correct concentration of coolant to prevent corrosion. Always check tool grippers for scoring or wear. Replace if worn or damaged.

    Weekly: Check gripper for damage and debris build up. Apply light coat of anti seize if needed.  METAFLUX Moly-Spray No.70-82 is recommended.

    Every Six Months: Measure the “E.M” dimension, adjust if necessary. Test clamp force if able.

Compatibility: All HSK 63F, 63B and 63D spindles. Also, HSK A50, B63, and E50. The tool gripper is interchangeable with these grippers:

Bellodi Tibi Rebo 41.109.63                   Ott Jakob: 95.600.004.3.6

Dimensions (mm): A = 10.5    B = 16    C = 0.5    D = 26.5    E = 26   F = CH3    G = 9

Notes: HSK tooling offers advantages over ISO tooling. Read here for more information.

HSK WorldHSK Links

Note: Grippers made by Ott Jakob require a tool to be present if the spindle is rotating. It is good practice to not mix fingers of the gripper of one unit with another, even if it is the same manufacturer.

 

 

 

Additional information

Weight .2 kg
Dimensions 4 x 4 x 8 cm

You may also like…